NO. 1-D S15 | Diesel Fuel Oil Testing According to ASTM D975-21

ASTM D975-21, Standard Specification for Diesel Fuel Oils, defines and provides specifications for No. 1-D S15 fuel oil.

No. 1-D S15 is ultra-low sulfur (ULSD) light middle distillate fuel used in diesel engine applications that require higher volatility than No. 2-D S15 with a maximum of 15 ppm sulfur allowed.

Paragon is capable of performing all of the analysis related to the testing of No. 1-D S15 fuel oil according to ASTM D975-21 Table 1 requirements.

Procedures included on our A2LA Scope of Accreditation to ISO/IEC 17025:2005 are designated as such.

ASTM D975-21 Table 1, Approved August 1, 2021

Service	Method Reference	Min. Sample Vol.	Price	ISO 17025
Flash Point	ASTM D93	150 mL	$60.00
Water and Sediment	ASTM D2709	100 mL	$75.00
Distillation Temperature	ASTM D86	210 mL	$95.00
Kinematic Viscosity, at 40 °C	ASTM D445	20 mL	$60.00
Ash	ASTM D482	150 mL	$75.00
Sulfur (Requires ASTM D4052)	ASTM D5453	10 mL	$98.00
Copper Strip Corrosion	ASTM D130	30 mL	$56.00
Cetane Number	ASTM D613	1000 mL	$322.00
One of the following must be met:
1. Cetane Index (Calculated) (Requires ASTM D86 and D4052)	ASTM D976-80	n/a mL	$26.00
OR
2. Aromaticity, Total Sample Basis (Not Included in Cost Below)	ASTM D1319	5 mL	$154.00
Operability Requirements - one of the following must be met:
1. Cloud Point	ASTM D2500	100 mL	$68.00
OR
2. Cold Filter Plug Point (Not Included in Cost Below)	ASTM D6371	100 mL	$136.00
Ramsbottom Carbon Residue (10% Bottoms)	ASTM D524	210 mL	$207.00
Lubricity by HFRR	ASTM D6079	2 mL	$351.00
Conductivity	ASTM D2624	100 mL	$81.00
Density	ASTM D4052	5 mL	$46.00
Total Cost		2087 mL	$1,620.00